05-29-2023, 08:13 PM (This post was last modified: 05-29-2023, 08:22 PM by leabreuh.)
[quote pid='34666' dateline='1685388742']
I don't understand what your problem is? Do you want to remove the partial opacity? Or reproduce it with another image? Or something else?
[/quote]
This image I found on the internet and it passes the color of the svg perfectly, without giving that opacity tone, which is matte white if you just apply direct opacity to any image. See the example of this image below, which is opened in gimp and simple opacity is applied, then see the other example.
image opened in gimp and applied opacity then exported to .webp
image of the example above that I want to do the same. This image is perfect, with no sign of opacity. Can you understand ?
(05-29-2023, 08:13 PM)rich2005 Wrote: I am not sure of requirements either.
The webp semi-transparent image looks like an overlay.
You can reduce that to your image (4) using Layer -> Transparency -> Semi-Flatten White is default but you can colour and avoid the other steps.
From that you can make a flat image. Lock the alpha channel and fill.
Then with the original webp image on top to give the details and a bit of shading.
I do not know where an SVG image comes into the process ?
I want to do the same as the example above in this image here. is it possible?
05-30-2023, 04:46 AM (This post was last modified: 05-30-2023, 05:23 AM by PixLab.)
Like Ofnuts and rich2005, not sure what you are asking, maybe be go straight to the point, something like "I want from this before > to this after"
Anyway let's start for what I understood
Duplicate your image twice
Check that your color background is white > , then on the top layer in the layers' dialog, right click on it, a context menu opens > Remove Alpha Channel (or you can go to Layer > Transparency > Remove Alpha Channel )
Then select the layer in the middle (still in the layer's dialog), then go to Filters > Generic > GEGL graph... and input these value > gegl:opacity value=5.55 < (copy/paste)
Re-activate the top layer and put it in Screen Mode then play with the opacity slider to have more light(white) or less light,
the lab-gown is fully opaque while retaining a transparent background all around
Note: you could do the middle layer with, Layer > Transparency > Threshold alpha..., but this filter will "pixelize" between transparency and opaque, thus it's better to use GEGL graph IMO
(05-29-2023, 08:13 PM)leabreuh Wrote: I want to do the same as the example above in this image here. is it possible?
For that first image: As PixLab noted, Layer -> Transparency -> Semi-Flatten does leave a hard border. I fix that by selecting the transparent area, then erasing the border using a small brush and stroking the selection with the eraser tool.
You can improve that flat looking image by using: Colors -> Auto -> White Balance.
...and I think the ultimate requirement is an image, easily coloured maybe for selling clothing. There are often multi-layer .PSD images that add options just by making layers visible. Make your own starting by;
Use a layer mask.
Get a selection from the image. Layer -> Transparency -> Alpha-to-selection
Make a new layer and create a layer mask: Layer -> Mask -> Add Layer Mask then choose the From Selection Option.
Turn selection off and put that layer into Darken Only mode.
The image is colored by filling the layer. Change colour as required. Save this as a Gimp .xcf file. For web use, Export as a .PNG image.
05-30-2023, 01:07 PM (This post was last modified: 05-30-2023, 01:14 PM by leabreuh.)
(05-30-2023, 10:36 AM)rich2005 Wrote:
(05-29-2023, 08:13 PM)leabreuh Wrote: I want to do the same as the example above in this image here. is it possible?
For that first image: As PixLab noted, Layer -> Transparency -> Semi-Flatten does leave a hard border. I fix that by selecting the transparent area, then erasing the border using a small brush and stroking the selection with the eraser tool.
You can improve that flat looking image by using: Colors -> Auto -> White Balance.
...and I think the ultimate requirement is an image, easily coloured maybe for selling clothing. There are often multi-layer .PSD images that add options just by making layers visible. Make your own starting by;
Use a layer mask.
Get a selection from the image. Layer -> Transparency -> Alpha-to-selection
Make a new layer and create a layer mask: Layer -> Mask -> Add Layer Mask then choose the From Selection Option.
Turn selection off and put that layer into Darken Only mode.
The image is colored by filling the layer. Change colour as required. Save this as a Gimp .xcf file. For web use, Export as a .PNG image.
..and the second image attached as a Gimp .xcf.gz file. Just open with Gimp.
Thanks for the answer.
But I need to leave image 2 with the same opacity as the example of image 1 at the beginning. I put the images at the top to explain how it was and now I need to make image 2 identical, in transparency with thumbnail identical to image 1, with image 1 being the first in the video, a medical coat and image 2 the suit with pants. I hope I explained it correctly
(05-30-2023, 04:46 AM)PixLab Wrote: Like Ofnuts and rich2005, not sure what you are asking, maybe be go straight to the point, something like "I want from this before > to this after"
Anyway let's start for what I understood
Duplicate your image twice
Check that your color background is white > , then on the top layer in the layers' dialog, right click on it, a context menu opens > Remove Alpha Channel (or you can go to Layer > Transparency > Remove Alpha Channel )
Then select the layer in the middle (still in the layer's dialog), then go to Filters > Generic > GEGL graph... and input these value > gegl:opacity value=5.55 < (copy/paste)
Re-activate the top layer and put it in Screen Mode then play with the opacity slider to have more light(white) or less light,
the lab-gown is fully opaque while retaining a transparent background all around
Note: you could do the middle layer with, Layer > Transparency > Threshold alpha..., but this filter will "pixelize" between transparency and opaque, thus it's better to use GEGL graph IMO
Thanks for the answer.
But I need to leave image2 with the same opacity as the example of image 1 at the beginning. I put the images at the top to explain how it was and now I need to make image 2 identical, in transparency with thumbnail identical to image 1, with image 1 being the first in the video, a medical coat and image 2 the suit with pants. I hope I explained it correctly.
image 2 ( I need this image 2 to have the same transparency ( opacity ), thumbnail, of image 1 with the details appearing and if it is opened on a white background, it has no signs of opacity, just like it is at the beginning of the question in the images I posted )
05-29-2023, 04:18 PM
(This post was last modified: 05-29-2023, 05:40 PM by rich2005.
Edit Reason: formatting
)
, then on the top layer in the layers' dialog, right click on it, a context menu opens >