Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Strange sound in HDD with Gimp
#3
(03-08-2018, 07:38 AM)Ofnuts Wrote: Gimp uses the standard system interfaces for disk I/O.

All I hear is a faint rattling.

if you will listen the file louder you will hear: metalic squeak

like: sq sq sq    sq    sq sq sq     sq sq

model of the hdd is old but i buy it 1-1,5 year ago it supports SMART

below is smartmontools result

Code:
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-5-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE Serial ATA
Device Model:     WDC WD2500JS-00MHB1
Serial Number:    WD-WCANK2154617
Firmware Version: 10.02E01
User Capacity:    250.059.350.016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Thu Mar  8 14:50:02 2018 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status:  (0x84)    Offline data collection activity
                   was suspended by an interrupting command from host.
                   Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                   without error or no self-test has ever
                   been run.
Total time to complete Offline
data collection:         ( 7680) seconds.
Offline data collection
capabilities:              (0x7b) SMART execute Offline immediate.
                   Auto Offline data collection on/off support.
                   Suspend Offline collection upon new
                   command.
                   Offline surface scan supported.
                   Self-test supported.
                   Conveyance Self-test supported.
                   Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                   power-saving mode.
                   Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                   General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  90) minutes.
Conveyance self-test routine
recommended polling time:      (   6) minutes.
SCT capabilities:            (0x103f)    SCT Status supported.
                   SCT Error Recovery Control supported.
                   SCT Feature Control supported.
                   SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 1 Raw_Read_Error_Rate     0x000f   100   253   051    Pre-fail  Always       -       0
 3 Spin_Up_Time            0x0003   192   186   021    Pre-fail  Always       -       5391
 4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       609
 5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
 7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
 9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       2988
10 Spin_Retry_Count        0x0013   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       605
190 Airflow_Temperature_Cel 0x0022   034   010   045    Old_age   Always   FAILING_NOW 66
194 Temperature_Celsius     0x0022   084   060   000    Old_age   Always       -       66
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
   2        0        0  Not_testing
   3        0        0  Not_testing
   4        0        0  Not_testing
   5        0        0  Not_testing
Selective self-test flags (0x0):
 After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


with other programs it run smoothly
Reply


Messages In This Thread
Strange sound in HDD with Gimp - by siniseu - 03-08-2018, 06:52 AM
RE: ghimp hdd strange sound - by Ofnuts - 03-08-2018, 07:38 AM
RE: ghimp hdd strange sound - by siniseu - 03-08-2018, 12:54 PM
RE: ghimp hdd strange sound - by Ofnuts - 03-08-2018, 01:54 PM
RE: ghimp hdd strange sound - by siniseu - 03-08-2018, 02:00 PM
RE: ghimp hdd strange sound - by Ofnuts - 03-08-2018, 06:32 PM
RE: ghimp hdd strange sound - by siniseu - 03-10-2018, 03:56 PM
RE: Strange sound in HDD with Gimp - by rich2005 - 03-09-2018, 11:18 AM
RE: Strange sound in HDD with Gimp - by Ofnuts - 03-10-2018, 04:47 PM
RE: Strange sound in HDD with Gimp - by rich2005 - 03-10-2018, 05:58 PM
RE: Strange sound in HDD with Gimp - by siniseu - 03-10-2018, 06:42 PM

Forum Jump: