Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Unable to simply paint...
#1
Greets!

Here's my trouble: I can't apply colors on my sheets with painting tools. I've chosen the primary color, and no color comes out of my brush/pencil/aerograph...

What's wrong please?
Reply
#2
Difficult to tell from your description.

Best guess: You have a grey scale image. Convert to RGB.
Image>Mode>RGB
Reply
#3
(03-08-2018, 03:25 PM)Blighty Wrote: Difficult to tell from your description.

Best guess: You have a grey scale image. Convert to RGB.
Image>Mode>RGB

Nops, i'm on RVB... Just to say that I can't use my paintin tools eh. Can't draw, paint, no colors comes out of my tools...
Reply
#4
Always best if you give as much information as possible. A complete screenshot (as below) often helps

Some common beginner problems.

1. The selected brush is the empty clipboard - select another brush
2. There is a tiny active selection difficult to see. (sometimes a single pixel) - turn off selections Select -> None
3. Painting on a layer under some other opaque layer. Also includes painting outside the bounds of a small active layer. - Check the active layer can be seen
4. Rarely. The lock pixels toggle is on - toggle it off.
5. Silly settings in the paint tool options. Zero opacity, tiny brush size, incorrect use of mode.

   

Check those. Come back with more info.
Reply
#5
Ooooook. Locked pixels... Confused

My thxs!
Reply


Forum Jump: